Medium-voltage cable; 1×240 RM; U0/U: 6/10 kV; Bare copper; PVC; Shielded; VDE certified; Fixed installation
Benefits
- VDE-certified cable with ◁VDE▷ testing mark for proven reliability and quality according to VDE 0276-620.
- Good installation properties enable easy installation, even in the event of difficult cable routing.
- Cross-linked conductive layers above and below the core insulation prevent partial discharges and enable constant operational safety.
- Available in conductor cross-sections up to 800 mm2.
- Available in voltage classes 6/10 (12) kV, 12/20 (24) kV and 18/30 (36) kV.
Applications
- Suitable for energy distribution in medium-voltage networks.
- For fixed installation in water, air and soil. In the ground, the minimum installation depth without additional, suitable underground protection is 0.6 m, and at least 0.8 m under roads (according to HD 620/VDE 0276-620 Part 10-C (point 4)).
- Also suitable for installation indoors and in closed installation ducts for energy supplier, industrial and distribution networks.
- Suitable for medium mechanical stress due to the PVC outer sheath.
- Suitable for outdoor use, subject to the temperature range and only if protected against direct sunlight.
- Use at temperatures down to -40°C possible.
Product notes
- Trade product, not a LAPP product.
Technical specifications
General information
| Product type | Medium-voltage cable |
|---|---|
| Weight | 3032 kg/km |
| Copper index | 2587 kg/km |
| customs code | 85446010 |
Electrical parameters
| Nominal voltage | U0/U: 6/10 kV AC rms according to IEC |
|---|---|
| Test voltage | 15 kV |
| Current rating according to | VDE 0276-620 |
| Max. conductor resistance at 20°C | 0.0754 Ω/km |
Product design
| N-German standard cables | N2XSY |
|---|---|
| Conductor number/size | 1×240 RM/25 |
| Nominal conductor cross-section (metric) | 240 mm² |
| Conductor material | Bare copper |
| Conductor design | IEC 60228 class 2: multi-wire |
| Conductor shape | Round |
| Conductor abbreviation | 1×240 RM |
| Number of cores | 1 |
| Shielded | Yes |
| Type of overall screening | Copper wires with cross-conductor copper spiral |
| Min. outer diameter | 33 mm |
| Max. outer diameter | 39 mm |
| Cable shape | Round |
| Core insulation basic material | Cross-linked polyethylene |
| Core insulation basic material, short form | XLPE |
| Basic material of outer sheath | Polyvinylchloride |
| Basic material of outer sheath, short form | PVC |
| Outer sheath colour | red |
Product features
| Application area | Fixed installation |
|---|---|
| Suitable for underground installation | direct; in cable trench; in protective cable conduit |
| Minimum bending radius, stationary | 15 x outer diameter |
| Minimum bending radius in mm, fixed installation | 585 mm |
| Temperature, fixed installation | -40 °C to 90 °C max. conductor temperature |
| Temperature, fixed installation max | 90 °C |
| Temperature, fixed installation min | -40 °C |
| Installation temperature min. | -5 °C |
| Flame-retardant | Yes |
| Flame retardance according to | IEC 60332-1-2 |
| UV-resistant | No |
| Halogen-free | No |
| Oil-resistant | No |
| Longitudinally watertight | No |
| Laterally watertight | No |
Certifications and standards
| CE marking | No |
|---|---|
| VDE certified | Yes |
| Product standard VDE | VDE 0276-620 |
| Flame retardance tested according to UN/ECE-R118 | No |
Datasheets and certificates
Manufacturer notes
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Trade product, not a LAPP product.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.