DC power cable; 3G6; U0/U: 0,75/1,5 kV; PVC; Core identification: Colours; Fixed installation
Benefits
- Suitable for establishing energy-saving DC grids in industrial plants.
- Suitable for direct underground installation thanks to tough insulation and sheathing material as per DIN VDE 0276-603.
- Good installation properties thanks to fine-wire, flexible conductor design.
- With colour code according to DIN EN 60445 for direct current systems.
Applications
- For direct current applications in the low voltage range.
- For industrial plants in which power is distributed via a direct current grid.
- For use in control systems, motors and frequency converters.
- Suitable for use in electromobility charging infrastructures.
- Can be used in dry, damp and wet environments.
- For open installation on cable trays.
- Suitable for direct underground installation.
- Withstands high mechanical stress.
Technical specifications
General information
| Brand | ÖLFLEX® |
|---|---|
| Product type | DC power cable |
| Weight | 322 kg/km |
| Copper index | 172.8 kg/km |
| customs code | 85444995 |
Electrical parameters
| Nominal voltage | U0/U: 0,75/1,5 kV DC according to IEC |
|---|---|
| Test voltage | 4 kV |
| Max. conductor resistance at 20°C | 3.3 Ω/km |
| Conductor/conductor operating capacitance (800Hz), approx. | 110 nF/km |
| Inductance (800 Hz), approx. | 0.671 mH/km |
Product design
| Cable dimensions | 3G6 |
|---|---|
| Nominal conductor cross-section (metric) | 6 mm² |
| Conductor material | Bare copper |
| Conductor design | IEC 60228 class 5: fine-wire |
| Including protective earth | Yes |
| Number of cores | 3 |
| Nominal outer diameter | 14.7 mm |
| Cable shape | Round |
| Core insulation basic material | Polyvinylchloride |
| Core insulation basic material, short form | PVC |
| Basic material of outer sheath | Polyvinylchloride |
| Basic material of outer sheath, short form | PVC |
| Outer sheath colour | black |
| Core identification | Colours |
| Conductor colour code | EN 60445 |
Product features
| Application area | Fixed installation |
|---|---|
| For torsional load | No |
| Minimum bending radius, stationary | 12 x outer diameter |
| Minimum bending radius in mm, fixed installation | 176.4 mm |
| Temperature, fixed installation | -40 °C to +70 °C max. conductor temperature |
| Temperature, fixed installation max | 70 °C |
| Temperature, fixed installation min | -40 °C |
| Flame-retardant | Yes |
| Flame retardance according to | IEC 60332-1-2 |
| UV-resistant | Yes |
| UV-resistant according to | EN 50618; EN 50620; EN ISO 4892-2, method A (colour change permitted) |
| Ozone-resistant | Yes |
| Ozone-resistant according to | EN 50396, method B |
| Halogen-free | No |
| Oil-resistant | No |
| PWIS-free | Yes |
| PWIS-free according to | VDMA 24364-B2-L |
Certifications and standards
| CE marking | Yes |
|---|---|
| VDE certified | No |
| Flame retardance tested according to UN/ECE-R118 | No |
Datasheets and certificates
Manufacturer notes
- Inductance and operating capacitance are neither defined nor controlled electrical parameters. The specified values were determined by calculation and may deviate due to tolerances.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- The absence of PWIS raw materials does not protect against the potential risk of contamination with substances that interfere with the paint wetting during subsequent handling of the product(s) during transport, storage or further processing after delivery.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.