Power and control cable; 3G2.5; U0/U: 300/500 V; PUR; Core identification: Colours; Flexible
Applications
- For fixed installation and occasional movement without tensile strain.
- Suitable for outdoor use, subject to the temperature range.
Technical specifications
General information
| Brand | ÖLFLEX® |
|---|---|
| Product type | Power and control cable |
| Weight | 186 kg/km |
| Copper index | 72 kg/km |
| customs code | 85444995 |
Electrical parameters
| Nominal voltage | U0/U: 300/500 V AC rms according to IEC |
|---|---|
| Test voltage | 3 kV |
| Current rating according to | VDE 0298-4 |
| Max. conductor resistance at 20°C | 7.98 Ω/km |
| Conductor/conductor operating capacitance (800Hz), approx. | 100 nF/km |
| Inductance (800 Hz), approx. | 0.712 mH/km |
Product design
| Cable dimensions | 3G2.5 |
|---|---|
| Nominal conductor cross-section (metric) | 2.5 mm² |
| Conductor material | Bare copper |
| Conductor design | IEC 60228 class 5: fine-wire |
| Including protective earth | Yes |
| Number of cores | 3 |
| Stranding type | Layered stranding |
| Interstice-filling functional layer | No |
| Shielded | No |
| Nominal outer diameter | 10.6 mm |
| Cable shape | Round |
| Core insulation basic material | Polyvinylchloride |
| Core insulation basic material, short form | PVC |
| Basic material of inner sheath | Polyvinylchloride |
| base material inner sheath shortname | PVC |
| Inner sheath colour | red |
| Basic material of outer sheath | Polyurethane |
| Basic material of outer sheath, short form | PUR |
| Outer sheath colour | yellow |
| Cable sheath RAL colour | RAL 1016 |
| Core identification | Colours |
| Conductor colour code | VDE 0293-308 |
Product features
| Application area | Flexible; Fixed installation |
|---|---|
| Minimum bending radius, stationary | 4 x outer diameter |
| Minimum bending radius in mm, fixed installation | 42.4 mm |
| Minimum bending radius, occasionally flexing | 15 x outer diameter |
| Minimum bending radius in mm, occasionally flexing | 159 mm |
| Temperature, fixed installation | -40 °C to 80 °C max. conductor temperature |
| Temperature, fixed installation max | 80 °C |
| Temperature, fixed installation min | -40 °C |
| max. conductor temperature, occasionally moved | -5 °C to 70 °C max. conductor temperature |
| Temperature, occasionally moved max | 70 °C |
| Temperature, occasionally moved min | -5 °C |
| Storage temperature min. | -25 °C |
| Max. storage temperature | 55 °C |
| Flame-retardant | Yes |
| Flame retardance according to | IEC 60332-1-2 |
| UV-resistant | Yes |
| UV-resistant according to | EN ISO 4892-2, method A (colour change permitted) |
| Chemical resistant | Yes |
| Hydrolysis-resistant | Yes |
| Halogen-free | No |
| Oil-resistant | Yes |
| Oil resistance according to | EN 50363-10-2 |
| PWIS-free | Yes |
| PWIS-free according to | VDMA 24364-B2-L |
Certifications and standards
| CE marking | Yes |
|---|---|
| EAC-certified | Yes |
| EAC certification number | ЕАЭС N RU Д-DE.АЮ64.В.00130/20 |
| UL recognized | No |
| UL listed | No |
| cUR recognised | No |
| cUL listed | No |
| CSA certified | No |
| VDE certified | No |
| HAR certified | No |
| Flame retardance tested according to UN/ECE-R118 | No |
| Ecolab certified | No |
Datasheets and certificates
- Data sheet: DB0012101EN.pdf
- Technical table: T9_Core ID code as per VDE colour code_int.pdf
- CE declaration of conformity: CE0012101EN.pdf
Manufacturer notes
- Inductance and operating capacitance are neither defined nor controlled electrical parameters. The specified values were determined by calculation and may deviate due to tolerances.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- The absence of PWIS raw materials does not protect against the potential risk of contamination with substances that interfere with the paint wetting during subsequent handling of the product(s) during transport, storage or further processing after delivery.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.