Crimping insert Pin; Number of contacts: 46+PE; Design size: 24B; 500 V AC rms / DC according to IEC; 16 A according to UL/CSA; For cross-section (min./max.): 0.5mm² – 4mm²; Polycarbonate
Benefits
- The H-EE inserts with machined contacts for a high number of pins in very tight spaces.
- For assembly in H-B housing
Applications
- Mechanical engineering
- Plant engineering
- Appliance and apparatus construction
Technical specifications
General information
| Brand | EPIC® |
|---|---|
| Product type | Crimping insert |
| Design size | 24B |
| Contacts included | No |
| Weight | 0.075 kg |
| Delivery Unit | 5 |
| customs code | 85472000 |
Electrical parameters
| Rated impulse voltage | 6 kV AC rms / DC according to IEC 61984 |
|---|---|
| Rated voltage | 500 V AC rms / DC according to IEC; 600 V AC rms / DC according to UL; 600 V AC rms / DC according to CSA |
| Rated current | 16 A according to UL/CSA; 16 A according to IEC |
| Overvoltage category | III |
| Max. contact resistance | 2 mΩ |
| Protective earth integrated into insert | Yes |
Product design
| Number of contacts | 46+PE |
|---|---|
| Number of power contacts | 46 |
| Number of PE contacts | 1 |
| Number of signal contacts | 0 |
| Contact diameter | 2.5 mm |
| Contact variant | Pin |
| Contact insert type | Plug |
| With wire protection | No |
| With protective earth | Yes |
| Connector type | Plug |
| Contact insert without contacts | Yes |
| EMC shielding | No |
| Conductor connection type | Crimp termination |
| PE connection type | Screw connection |
| Min. connectable conductor cross-section AWG | 20 AWG |
| Max. connectable conductor cross-section AWG | 12 AWG |
| Min. connectable conductor cross-section (mm2) | 0.5 mm² |
| Max. connectable conductor cross-section (mm2) | 4 mm² |
| Material contact insert | Polycarbonate |
| Contact insert material, short form | PC |
| Colour | grey |
Product features
| Min. number of insertion cycles | 100 |
|---|---|
| Pollution degree | 3 |
| For use in hazardous areas | No |
| Short-term temperature peaks | 125 °C |
| Operating temperature min. | -40 °C |
| Operating temperature max. | 100 °C |
| Flame-retardant | Yes |
| Flame retardance according to | UL 94 V-0 |
| UV-resistant | No |
| Chemical resistant | No |
| Acid-resistant | No |
| Halogen-free | Yes |
| Minimum tightening torque for PE connection | 1.2 Nm |
| Maximum tightening torque for PE connection | 1.2 Nm |
| Impact-resistant | Yes |
| Vibration protection | Yes |
Certifications and standards
| CE marking | No |
|---|---|
| UR recognised | Yes |
| UR certification | according to UL 1977 (e-file number: E75770) |
| UL category control number | ECBT2 |
| cUR recognised | No |
| CSA certified | No |
| VDE certified | No |
| Product standard according to IEC | IEC 61984 |
| TÜV certified | No |
| Fire protection tested for railway vehicles | No |
Datasheets and certificates
- Data sheet: DB10186400EN.pdf
- Data sheet: DB10186400EN.pdf
- Operating instructions: L10180400DE_EN.pdf
Manufacturer notes
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.