Low-frequency data cable; 4X0.34; Conductor colour code: DIN 47100; PVC; Cable chain
Benefits
- Proven cable successfully tested for over 2 million bending cycles in cable chains.
- Relatively small bending radii thanks to highly flexible cable design.
- Compact design enables small outer diameters despite high number of cores.
Applications
- Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range.
- For use in control, regulation and measurement circuits.
- The cable design allows flexible, continuously moving use in moving machine parts and in cable chains.
- Can be used in dry and damp spaces.
- The PVC outer sheath is resistant to acids and alkalis and has limited oil resistance.
Technical specifications
General information
| Brand | UNITRONIC® |
|---|---|
| Product type | Low-frequency data cable |
| Weight | 57 kg/km |
| Copper index | 13.6 kg/km |
| Industry segment | Machine tools |
| customs code | 85444995 |
Electrical parameters
| Test voltage | 1.5 kV |
|---|---|
| Max. conductor resistance at 20°C | 57 Ω/km |
| Conductor/conductor operating capacitance (800Hz), approx. | 101 nF/km |
| Inductance (800 Hz), approx. | 0.729 mH/km |
Product design
| LiF fine-stranded cables | LiFYY |
|---|---|
| Cable dimensions | 4X0.34 |
| Nominal conductor cross-section (metric) | 0.34 mm² |
| Conductor material | Bare copper |
| Conductor design | extra-fine wire |
| Including protective earth | No |
| Number of cores | 4 |
| Stranding type | Layered stranding |
| Shielded | No |
| Wrapping over screening | Fleece wrapping |
| Nominal outer diameter | 5.4 mm |
| Cable shape | Round |
| Core insulation basic material | Polyvinylchloride |
| Core insulation basic material, short form | PVC |
| Basic material of outer sheath | Polyvinylchloride |
| Basic material of outer sheath, short form | PVC |
| Outer sheath colour | grey |
| Cable sheath RAL colour | RAL 7001 |
| Core identification | Colours |
| Conductor colour code | DIN 47100 |
Product features
| Application area | Cable chain; Flexible; Fixed installation |
|---|---|
| For permanent bending | Yes |
| For torsional load | No |
| Minimum bending radius, stationary | 3 x outer diameter |
| Minimum bending radius in mm, fixed installation | 16.2 mm |
| Minimum bending radius, dynamic continuously flexing | 5 x outer diameter |
| Minimum bending radius in mm, dynamic continuously flexing | 27 mm |
| Minimum bending radius, occasionally flexing | 5 x outer diameter |
| Minimum bending radius in mm, occasionally flexing | 27 mm |
| Maximum bending cycles | 3,000,000 |
| Maximum travel distance | 5 m |
| Temperature, fixed installation | -40 °C to 80 °C max. conductor temperature |
| Temperature, fixed installation max | 80 °C |
| Temperature, fixed installation min | -40 °C |
| max. conductor temperature, occasionally moved | -5 °C to 70 °C max. conductor temperature |
| Temperature, occasionally moved max | 70 °C |
| Temperature, occasionally moved min | -5 °C |
| Flame-retardant | Yes |
| Flame retardance according to | IEC 60332-1-2 |
| UV-resistant | No |
| Halogen-free | No |
| Oil-resistant | No |
| PWIS-free | Yes |
| PWIS-free according to | VDMA 24364-B2-L |
Certifications and standards
| CE marking | Yes |
|---|---|
| EAC-certified | Yes |
| EAC certification number | ЕАЭС N RU Д-DE.АЮ64.В.00130/20 |
| UL recognized | No |
| UL listed | No |
| cUR recognised | No |
| cUL listed | No |
| CSA certified | No |
| VDE certified | No |
| Flame retardance tested according to UN/ECE-R118 | No |
Datasheets and certificates
- Data sheet: DB0027841EN.pdf
- Technical table: T9_Core ID code as per VDE colour code_int.pdf
- Technical table: T3_Assembly guidelines_int.pdf
- CE declaration of conformity: CE0027841EN.pdf
Manufacturer notes
- Inductance and operating capacitance are neither defined nor controlled electrical parameters. The specified values were determined by calculation and may deviate due to tolerances.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- The absence of PWIS raw materials does not protect against the potential risk of contamination with substances that interfere with the paint wetting during subsequent handling of the product(s) during transport, storage or further processing after delivery.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.