Low-frequency data cable; 4X2X0.5; Conductor colour code: DIN 47100; PVC; Shielded; Flexible
Benefits
- With UV-resistant PVC outer sheath.
- Ideal protection against electromagnetic interference thanks to copper stranded shielding with a high degree of coverage.
- The conductor circuits are well decoupled thanks to the twin cabling (TP, Twisted Pair) with short lay lengths.
- Compact design enables small outer diameters despite high number of cores.
- Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website.
Applications
- Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range.
- For use in control, regulation and measurement circuits.
- Especially for environments where electromagnetic compatibility (EMC) is required.
- For fixed installation and occasional movement.
- Can be used in dry and damp environments.
- Suitable for outdoor use, subject to the temperature range.
Technical specifications
General information
| Brand | UNITRONIC® |
|---|---|
| Product type | Low-frequency data cable |
| Weight | 127 kg/km |
| Copper index | 82 kg/km |
| Industry segment | Power Grids |
| customs code | 85444995 |
Electrical parameters
| Test voltage | 1.5 kV |
|---|---|
| Max. conductor resistance at 20°C | 39 Ω/km |
| Conductor/conductor operating capacitance (800Hz), approx. | 112 nF/km |
| Conductor/shielding operating capacitance (800Hz), approx. | 174 nF/km |
| Inductance (800 Hz), approx. | 0.722 mH/km |
Product design
| Li-stranded cables | LiYCY (TP) |
|---|---|
| Cable dimensions | 4X2X0.5 |
| Nominal conductor cross-section (metric) | 0.5 mm² |
| Conductor material | Bare copper |
| Conductor design | fine-wire |
| Including protective earth | No |
| Number of pairs | 4 |
| Stranding type | Twisted-pair |
| Shielded | Yes |
| Type of overall screening | Wrapped with braided tin-plated copper wires |
| Nominal outer diameter | 9.4 mm |
| Cable shape | Round |
| Core insulation basic material | Polyvinylchloride |
| Core insulation basic material, short form | PVC |
| Basic material of outer sheath | Polyvinylchloride |
| Basic material of outer sheath, short form | PVC |
| Outer sheath colour | black |
| Core identification | Colours |
| Conductor colour code | DIN 47100 |
Product features
| Application area | Flexible; Fixed installation |
|---|---|
| Minimum bending radius, stationary | 6 x outer diameter |
| Minimum bending radius in mm, fixed installation | 56.4 mm |
| Minimum bending radius, occasionally flexing | 15 x outer diameter |
| Minimum bending radius in mm, occasionally flexing | 141 mm |
| Temperature, fixed installation | -40 °C to 80 °C max. conductor temperature according to IEC |
| Temperature, fixed installation max | 80 °C |
| Temperature, fixed installation min | -40 °C |
| max. conductor temperature, occasionally moved | -5 °C to 70 °C max. conductor temperature according to IEC |
| Temperature, occasionally moved max | 70 °C |
| Temperature, occasionally moved min | -5 °C |
| Flame-retardant | Yes |
| Flame retardance according to | IEC 60332-1-2 |
| UV-resistant | Yes |
| UV-resistant according to | EN 50525-1 (cables with a black sheath are suitable for permanent outdoor use) |
| Weather-resistant | Yes |
| Halogen-free | No |
| Oil-resistant | No |
| PWIS-free | Yes |
| PWIS-free according to | VDMA 24364-B2-L |
Certifications and standards
| CE marking | Yes |
|---|---|
| VDE certified | No |
Datasheets and certificates
- Data sheet: DB1030600EN.pdf
- Technical table: T9_Core ID code as per VDE colour code_int.pdf
- CE declaration of conformity: CE1030600EN.pdf
- CPR declaration of performance: UILCPRDOP17_0034302-1EN.pdf
Manufacturer notes
- Inductance and operating capacitance are neither defined nor controlled electrical parameters. The specified values were determined by calculation and may deviate due to tolerances.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- The absence of PWIS raw materials does not protect against the potential risk of contamination with substances that interfere with the paint wetting during subsequent handling of the product(s) during transport, storage or further processing after delivery.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.