Low-frequency data cable; 3X0.5; Conductor colour code: DIN 47100; PUR; Shielded; Flexible
Benefits
- Durable, resistant product thanks to the outer sheath PUR material that is resistant to abrasions, notches and cuts.
- Ideal protection against electromagnetic interference thanks to copper stranded shielding with a high degree of coverage.
- Compact design enables small outer diameters despite high number of cores.
Applications
- Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range.
- For use in control, regulation and measurement circuits.
- For fixed installation and occasional movement.
- Can be used in dry, damp and wet environments.
- The PUR outer sheath withstands high mechanical loads.
- The PUR outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals.
- Suitable for outdoor use.
Technical specifications
General information
| Brand | UNITRONIC® |
|---|---|
| Product type | Low-frequency data cable |
| Weight | 70 kg/km |
| Copper index | 38 kg/km |
| Industry segment | HVAC |
| customs code | 85444993 |
Electrical parameters
| Test voltage | 1.5 kV |
|---|---|
| Max. conductor resistance at 20°C | 39 Ω/km |
| Conductor/conductor operating capacitance (800Hz), approx. | 117 nF/km |
| Conductor/shielding operating capacitance (800Hz), approx. | 181 nF/km |
| Inductance (800 Hz), approx. | 0.722 mH/km |
Product design
| Li-stranded cables | LiYC11Y |
|---|---|
| Cable dimensions | 3X0.5 |
| Nominal conductor cross-section (metric) | 0.5 mm² |
| Conductor material | Bare copper |
| Conductor design | fine-wire |
| Including protective earth | No |
| Number of cores | 3 |
| Stranding type | Layered stranding |
| Shielded | Yes |
| Type of overall screening | Tin-plated copper braiding |
| Nominal outer diameter | 5.9 mm |
| Cable shape | Round |
| Core insulation basic material | Polyvinylchloride |
| Core insulation basic material, short form | PVC |
| Basic material of outer sheath | Polyurethane |
| Basic material of outer sheath, short form | PUR |
| Outer sheath colour | grey |
| Core identification | Colours |
| Conductor colour code | DIN 47100 |
Product features
| Application area | Flexible; Fixed installation |
|---|---|
| Minimum bending radius, stationary | 6 x outer diameter |
| Minimum bending radius in mm, fixed installation | 35.4 mm |
| Minimum bending radius, occasionally flexing | 15 x outer diameter |
| Minimum bending radius in mm, occasionally flexing | 88.5 mm |
| Temperature, fixed installation | -40 °C to 80 °C max. conductor temperature |
| Temperature, fixed installation max | 80 °C |
| Temperature, fixed installation min | -40 °C |
| max. conductor temperature, occasionally moved | -5 °C to 70 °C max. conductor temperature |
| Temperature, occasionally moved max | 70 °C |
| Temperature, occasionally moved min | -5 °C |
| Flame-retardant | Yes |
| UV-resistant | Yes |
| UV-resistant according to | EN ISO 4892-2, method A (colour change permitted) |
| Ozone-resistant | Yes |
| Ozone-resistant according to | EN 50396, method B |
| Chemical resistant | Yes |
| Halogen-free | No |
| Oil-resistant | Yes |
| PWIS-free | Yes |
| PWIS-free according to | VDMA 24364-B2-L |
Certifications and standards
| CE marking | Yes |
|---|---|
| EAC-certified | Yes |
| EAC certification number | ЕАЭС N RU Д-DE.АЮ64.В.00130/20 |
| VDE certified | No |
| Flame retardance tested according to UN/ECE-R118 | No |
Datasheets and certificates
- Data sheet: DB0032800EN.pdf
- Technical table: T9_Core ID code as per VDE colour code_int.pdf
- CE declaration of conformity: CE0032800EN.pdf
Manufacturer notes
- Inductance and operating capacitance are neither defined nor controlled electrical parameters. The specified values were determined by calculation and may deviate due to tolerances.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- The absence of PWIS raw materials does not protect against the potential risk of contamination with substances that interfere with the paint wetting during subsequent handling of the product(s) during transport, storage or further processing after delivery.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.