Low-frequency data cable; 3X20 AWG; PVC; Shielded; Flexible
Benefits
- Low-capacitance core insulation for long transmission paths.
- Ideal protection against electromagnetic interference thanks to static shielding with aluminium-laminated foil and copper drain wire for the shield contact.
- With robust, flexible and resistant PVC outer sheath.
Applications
- Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range.
- For use in control, regulation and measurement circuits.
- Especially for environments where electromagnetic compatibility (EMC) is required.
- For fixed installation and occasional movement.
- Can be used in dry, damp and wet spaces.
- The PVC outer sheath is resistant to acids and alkalis and has limited oil resistance.
Technical specifications
General information
| Brand | UNITRONIC® |
|---|---|
| Product type | Low-frequency data cable |
| Weight | 46 kg/km |
| Copper index | 23 kg/km |
| customs code | 85444993 |
Electrical parameters
| Maximum operating voltage (not for power transmission) | 500 V |
|---|---|
| Test voltage | 1.5 kV |
| Short-circuit temperature [5s] | 150 °C |
| Max. conductor resistance at 20°C | 36.7 Ω/km |
| Loop resistance at 20°C | 31.2 Ω/km |
| Conductor/conductor operating capacitance (800Hz), approx. | 66 nF/km |
| Conductor/shielding operating capacitance (800Hz), approx. | 102 nF/km |
| Inductance (800 Hz), approx. | 0.728 mH/km |
| Nominal surge impedance | 95 Ω |
Product design
| Cable dimensions | 3X20 AWG |
|---|---|
| Nominal conductor cross-section (metric) | 0.52 mm² |
| Nominal conductor cross-section (AWG) | 20 AWG |
| Leading conductor cross-section | AWG |
| Conductor material | Tin-plated copper |
| Conductor design | 7-wire |
| Including protective earth | No |
| Number of cores | 3 |
| Stranding type | Layered stranding |
| Shielded | Yes |
| Type of overall screening | Aluminium-laminated plastic foil |
| Nominal core diameter | 1.76 mm |
| Nominal outer diameter | 5.3 mm |
| Cable shape | Round |
| Core insulation basic material | Polyethylene |
| Core insulation basic material, short form | PE |
| Basic material of outer sheath | Polyvinylchloride |
| Basic material of outer sheath, short form | PVC |
| Outer sheath colour | grey |
| Core identification | Colours |
Product features
| Application area | Flexible; Fixed installation |
|---|---|
| Minimum bending radius, stationary | 6 x outer diameter |
| Minimum bending radius in mm, fixed installation | 31.8 mm |
| Minimum bending radius, occasionally flexing | 10 x outer diameter |
| Minimum bending radius in mm, occasionally flexing | 53 mm |
| Temperature, fixed installation | -40 °C to 80 °C max. conductor temperature according to IEC |
| Temperature, fixed installation max | 80 °C |
| Temperature, fixed installation min | -40 °C |
| max. conductor temperature, occasionally moved | -5 °C to 70 °C max. conductor temperature according to IEC |
| Temperature, occasionally moved max | 70 °C |
| Temperature, occasionally moved min | -5 °C |
| Flame-retardant | Yes |
| Flame retardance according to | IEC 60332-1-2 |
| UV-resistant | No |
| Weather-resistant | No |
| Ozone-resistant | Yes |
| Halogen-free | No |
| Oil-resistant | No |
| PWIS-free | Yes |
| PWIS-free according to | VDMA 24364-B2-L |
Certifications and standards
| CE marking | Yes |
|---|---|
| EAC-certified | Yes |
| EAC certification number | ЕАЭС N RU Д-DE.АЮ64.В.00130/20 |
| VDE certified | No |
Datasheets and certificates
- Data sheet: DB0033000EN.pdf
- Technical table: T9_Core ID code as per VDE colour code_int.pdf
- CE declaration of conformity: CE0033000EN.pdf
Manufacturer notes
- Inductance and operating capacitance are neither defined nor controlled electrical parameters. The specified values were determined by calculation and may deviate due to tolerances.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- The absence of PWIS raw materials does not protect against the potential risk of contamination with substances that interfere with the paint wetting during subsequent handling of the product(s) during transport, storage or further processing after delivery.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.