Insert with screw connection Pin; Number of contacts: 7; Design size: 16B; For cross-section (min./max.): 1.5mm² – 16mm²; Contacts included; Polycarbonate
Benefits
- Power and control in one connector insert
- Best in combination with ÖLFLEX® SERVO
Applications
- Mechanical engineering
- Control engineering
- Renewable energy
Technical specifications
General information
| Brand | EPIC® |
|---|---|
| Product type | Insert with screw connection |
| Design size | 16B |
| Contacts included | Yes |
| Weight | 0.121 kg |
| Delivery Unit | 10 |
| customs code | 85366990 |
Electrical parameters
| Rated voltage power contact | 830 V AC rms / DC according to IEC to 6 |
|---|---|
| Rated voltage signal contact | 400 V AC rms / DC according to IEC to 2 |
| Rated impulse voltage | 8 kV AC rms / DC according to IEC 61984 |
| Rated current power contact | 80 A according to IEC |
| Rated current signal contact | 16 A according to IEC |
| Overvoltage category | III |
| Max. contact resistance | 5 mΩ |
| Protective earth integrated into insert | Yes |
Product design
| Number of contacts | 7 |
|---|---|
| Number of power contacts | 6 |
| Number of PE contacts | 1 |
| Number of signal contacts | 2 |
| Contact diameter | 6 mm |
| Contact variant | Pin |
| Contact manufacturing method | Machined |
| Contact insert type | Plug |
| With wire protection | No |
| With protective earth | Yes |
| Connector type | Plug |
| Contact insert without contacts | No |
| EMC shielding | No |
| Conductor connection type | Screw connection |
| PE connection type | Screw connection |
| Min. connectable conductor cross-section AWG | 16 AWG |
| Max. connectable conductor cross-section AWG | 6 AWG |
| Min. connectable conductor cross-section (mm2) | 1.5 mm² |
| Max. connectable conductor cross-section (mm2) | 16 mm² |
| Contact material | Brass |
| Contact material, short form | CuZn |
| Contact coating material | Silver-plated |
| Contact coating material, short form | Ag |
| Material contact insert | Polycarbonate |
| Contact insert material, short form | PC |
| Colour | grey |
Product features
| Min. number of insertion cycles | 500 |
|---|---|
| Pollution degree | 3 |
| For use in hazardous areas | No |
| Operating temperature min. | -40 °C |
| Operating temperature max. | 125 °C |
| Flame-retardant | Yes |
| Flame retardance according to | UL 94 V-0 |
| UV-resistant | No |
| Chemical resistant | No |
| Acid-resistant | No |
| Halogen-free | No |
| Minimum tightening torque for PE connection | 1.2 Nm |
| Maximum tightening torque for PE connection | 1.2 Nm |
| Impact-resistant | Yes |
| Vibration protection | No |
Certifications and standards
| CE marking | No |
|---|---|
| EAC-certified | Not required |
| EAC certification number | Отказное письмо № 39 |
| UR recognised | Yes |
| UR certification | according to UL 1977 (e-file number: E75770) |
| UL category control number | ECBT2 |
| cUR recognised | Yes |
| cUR certification | according to CSA C22.2 No. 182.3 (e-file number: E75770) |
| cUR category control number | ECBT8 |
| CSA certified | No |
| VDE certified | No |
| Product standard according to IEC | IEC 61984 |
| TÜV certified | No |
| Fire protection tested for railway vehicles | No |
Datasheets and certificates
Manufacturer notes
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- PE connection with a 16 mm² conductor only with the recommended ring cable lug 44424029.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.