MH module modular system; Crimp termination; Number of contacts: 2; Required slots: 2; Number of slots: 2; For cross-section (min./max.): 10mm² – 35mm²; 1000 V AC rms / DC according to IEC; 100 A according to IEC
Benefits
- Double module with 2 power contacts for high power supply up to 100 A and voltages up to 1000 V.
- Connectors with modular configurations can be connected to market-standard connectors.
- Crimp termination creates a vibration-proof connection, provides maximum contact protection between the contact and cable and is suitable for automated assembly.
- Different crimp contacts available for different conductor cross-sections.
- Locks effortlessly into the fixed EPIC® MH multi-frame with an audible click. Much easier assembly than hinged and sliding frames.
- UL certification according to technical data enables the product to be used on the North American market.
Applications
- For the production of a modular rectangular connector insert.
- For connecting devices and machines to a power supply in various applications.
- Compliant with standards for use in railway vehicles (fire behaviour test according to DIN EN 45545-2:2016-02, requirements sets R22 and R23, hazard levels HL1, HL2 and HL3).
Technical specifications
General information
| Brand | EPIC® |
|---|---|
| Product type | MH module modular system |
| Scope of delivery | Order contacts separately |
| Contacts included | No |
| Weight | 0.016 kg |
| Delivery Unit | 10 |
| Installation type | clip on |
| Industry segment | Rolling Stock |
| customs code | 85366990 |
Electrical parameters
| Rated impulse voltage | 8 kV AC rms / DC according to DIN EN 61984 |
|---|---|
| Rated voltage | 1000 V AC rms / DC according to IEC |
| Rated current | 100 A according to IEC |
| Max. contact resistance | 5 mΩ |
| Protective earth integrated into insert | No |
Product design
| Number of contacts | 2 |
|---|---|
| Number of power contacts | 0 |
| Number of PE contacts | 0 |
| Number of signal contacts | 0 |
| Number of data contacts | 0 |
| Number of slots | 2 |
| Required slots | 2 |
| Contact insert type | Plug |
| With wire protection | No |
| With protective earth | No |
| Shield contact | No |
| EMC shielding | No |
| Conductor connection type | Crimp termination |
| Min. connectable conductor cross-section AWG | 8 AWG |
| Max. connectable conductor cross-section AWG | 1 AWG |
| Min. connectable conductor cross-section (mm2) | 10 mm² |
| Max. connectable conductor cross-section (mm2) | 35 mm² |
| Material | Polyamide |
| Material, short form | PA |
| Colour | black |
Product features
| Min. number of insertion cycles | 500 |
|---|---|
| Pollution degree | 3 |
| Operating temperature min. | -40 °C |
| Operating temperature max. | 125 °C |
| Flame-retardant | Yes |
| Flame retardance according to | UL 94 V-0 |
| Halogen-free | No |
Certifications and standards
| CE marking | No |
|---|---|
| UR recognised | Yes |
| UR certification | according to UL 1977 (CCN: ECBT2 / e-file number: E75770) |
| UL category control number | ECBT2 |
| cUR recognised | Yes |
| cUR certification | according to CSA C22.2 No. 182.3 (CCN: ECBT8 / e-file number: E75770) |
| cUR category control number | ECBT8 |
| CSA certified | No |
| VDE certified | No |
| TÜV certified | No |
| Fire protection tested for railway vehicles | Yes |
| Fire protection for railway vehicles hazard level | EN 45545-2 HL1; EN 45545-2 HL2; EN 45545-2 HL3 |
Datasheets and certificates
Manufacturer notes
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.