Servo cable; 4G10; Extended-Line; PUR; Shielded; UL recognized; Cable chain
Benefits
- Cable construction without filler cords and with a special, easily detachable inner sheath saves up to 50 % of the time needed to prepare the cable for assembly. There is no need to remove many individual filling cords.
- Less soiling at the workplace, as there are no more filling cords to deal with during assembly.
- Optimised service life in drag chain applications, even with long travel distances and high accelerations, as the requirements of the LAPP Extended Line performance class are exceeded.
- Extremely weather-resistant with a wide temperature range.
- Particularly resistant to oil and drilling fluids and therefore ideal for harsh environments.
- Low-capacitance core insulation for long transmission paths.
- Ideal protection against electromagnetic interference thanks to copper stranded shielding with a high degree of coverage.
- UL/CSA certification according to technical data enables the product to be used in the North American market.
Applications
- For connecting frequency converters and servo motors.
- Cable design allows highly flexible, continuously moving use in moving machine parts and in cable chains.
- Can be used in dry and damp conditions, and especially in harsh and oily environments.
- The PUR outer sheath withstands high mechanical loads.
- The PUR outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals.
- Suitable for outdoor use.
- Flexible use at temperatures down to -40°C.
Product notes
- For use in cable chains: please follow the T3 technical assembly guidelines.
- Bending cycles and application parameters: please refer to the selection table A2-1.
- Lenze® is a registered trademark of Lenze Operations GmbH and is used for information and comparison purposes only.
- SEW-EURODRIVE® is a registered trademark of SEW-Eurodrive GmbH & Co. KG and is used for information and comparison purposes only.
- SIEMENS® is a registered trademark of Siemens AG and is used for information and comparison purposes only.
- Bosch Rexroth® is a registered trademark of Bosch Rexroth AG and is used for information and comparison purposes only.
Technical specifications
General information
| Brand | ÖLFLEX® |
|---|---|
| Product type | Servo cable |
| Weight | 672 kg/km |
| Copper index | 449 kg/km |
| Performance class | Extended-Line |
| customs code | 85444995 |
Electrical parameters
| Power cores nominal voltage | U0/U: 0,6/1 kV AC rms according to IEC |
|---|---|
| Nominal voltage control cores | U0/U: 0,6/1 kV AC rms according to IEC |
| Rated voltage | 1000 V AC rms according to cRU AWM; 1000 V AC rms according to UL AWM |
| Test voltage core/core | 4 kV |
| Test voltage core/screening | 4 kV |
| Power cores test voltage | 4 kV |
| Test voltage control cores | 4 kV |
| Current rating according to | VDE 0298-4 |
Product design
| Conductor number/size | 4G10 |
|---|---|
| Compatible drive/feedback system | Various |
| Nominal conductor cross-section (metric) | 10 mm² |
| Nominal conductor cross-section (AWG) | 8 AWG |
| Leading conductor cross-section | mm² |
| Conductor material | Bare copper |
| Conductor design | IEC 60228 class 6: extra-fine wire |
| Including protective earth | Yes |
| Number of cores | 4 |
| Cable element 1 | Power core: 4G10 |
| Stranding type | Layered stranding |
| Wrapping over stranding | Fleece wrapping |
| Shielded | Yes |
| Type of overall screening | Tin-plated copper braiding |
| Nominal outer diameter | 18.4 mm |
| Cable shape | Round |
| Core insulation basic material | Polypropylene |
| Core insulation basic material, short form | PP |
| Basic material of outer sheath | Polyurethane |
| Basic material of outer sheath, short form | PUR |
| Outer sheath colour | orange |
| Cable sheath RAL colour | RAL 2003 |
| Core identification | Alphanumeric |
Product features
| Application area | Cable chain; Flexible |
|---|---|
| For permanent bending | Yes |
| Minimum bending radius, stationary | 4 x outer diameter |
| Minimum bending radius in mm, fixed installation | 73.6 mm |
| Minimum bending radius, dynamic continuously flexing | 7.5 x outer diameter |
| Minimum bending radius in mm, dynamic continuously flexing | 138 mm |
| Minimum bending radius, occasionally flexing | 7.5 x outer diameter |
| Minimum bending radius in mm, occasionally flexing | 138 mm |
| Maximum bending cycles | 13,000,000 |
| Maximum travel distance | 100 m |
| Maximum speed sliding | 5 m/s |
| Maximum self-supporting speed | 10 m/s |
| Maximum acceleration | 50 m/s² |
| Temperature, fixed installation | -50 °C to 90 °C max. conductor temperature according to EN; to 90 °C max. conductor temperature according to UL AWM; to 90 °C max. conductor temperature according to CSA AWM |
| Temperature, fixed installation max | 90 °C |
| Temperature, fixed installation min | -50 °C |
| max. conductor temperature, occasionally moved | -40 °C to 90 °C max. conductor temperature according to EN; to 90 °C max. conductor temperature according to UL AWM; to 90 °C max. conductor temperature according to CSA AWM |
| Temperature, occasionally moved max | 90 °C |
| Temperature, occasionally moved min | -40 °C |
| Temperature, dynamic continuously flexing | -40 °C to 90 °C max. conductor temperature according to EN; to 90 °C max. conductor temperature according to UL AWM; to 90 max. conductor temperature according to CSA AWM |
| Temperature, dynamic continuously flexing max | 90 °C |
| Temperature, dynamic continuously flexing min | -40 °C |
| Flame-retardant | Yes |
| Flame retardance according to | IEC 60332-1-2; UL VW-1; CSA FT1 |
| UV-resistant | Yes |
| UV-resistant according to | DIN EN ISO 4892-2 method A; EN 50620; EN 50618 |
| Weather-resistant | Yes |
| Weather-resistant according to | ISO 4892-2 |
| Ozone-resistant | Yes |
| Ozone-resistant according to | EN 50396, method B |
| Chemical resistant | Yes |
| Hydrolysis-resistant | Yes |
| Halogen-free | Yes |
| Halogen-free according to | IEC 60754-1 |
| Oil-resistant | Yes |
| Oil resistance according to | EN 50363-10-2 |
| MUD resistance according to | IEC 60092-360, Annex C+D |
| PWIS-free | Yes |
| PWIS-free according to | VDMA 24364-B2-L |
| Water-resistant | Yes |
| Low capacitance | Yes |
| Low-adhesive sheath surface | Yes |
| Mechanically resistant | Yes |
Certifications and standards
| CE marking | Yes |
|---|---|
| UL recognized | Yes |
| UL AWM certification | 11657 according to UL 758 (e-file number: E63634); 21209 according to UL 758 (e-file number: E63634) |
| UL listed | No |
| cUR recognised | Yes |
| cUR certification | AWM I A according to CSA C22.2 No. 210 (e-file number: E63634); AWM I B according to CSA C22.2 No. 210 (e-file number: E63634); AWM II A according to CSA C22.2 No. 210 (e-file number: E63634); AWM II B according to CSA C22.2 No. 210 (e-file number: E63634) |
| cUL listed | No |
| CSA certified | No |
| VDE certified | No |
Datasheets and certificates
- Data sheet: DB1037950EN.pdf
- UL approval: ZUE63634.pdf
- Selection table: A2_1_Cables for use in power chains Bending cycles and operation parameters.pdf
- cUL approval: ZKE63634.pdf
- CE declaration of conformity: CE1037950EN.pdf
Manufacturer notes
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- The absence of PWIS raw materials does not protect against the potential risk of contamination with substances that interfere with the paint wetting during subsequent handling of the product(s) during transport, storage or further processing after delivery.
- DESINA – Decentralised and standardised installation technology for machine tools and production systems.
- Lenze® is a registered trademark of Lenze Operations GmbH and is used for information and comparison purposes only.
- SEW-EURODRIVE® is a registered trademark of SEW-Eurodrive GmbH & Co. KG and is used for information and comparison purposes only.
- SIEMENS® is a registered trademark of Siemens AG and is used for information and comparison purposes only.
- Bosch Rexroth® is a registered trademark of Bosch Rexroth AG and is used for information and comparison purposes only.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.