Panel-mount base; For cross-section (min./max.): 50mm² – 120mm²;
Benefits
- Mechanical coding and colour-identification of the housing entries prevent incorrect connection of the connectors.
- Connectors can only be plugged in sequence and in the correct order (PE, N, L1, L2, L3). The connector locks audibly by turning it 45° clockwise.
- Unauthorised disconnection of the safe connection can be prevented by closing the safety lock with a square key. The connection is maintained until the lock is unlocked.
- For conductor cross-sections up to 120 mm².
- With integrated microswitch for optional remote query (e.g. for load disconnector or alarm cable). The connector for connecting the micro switch is included.
- Protection class IP 20 (finger-safe); IP 65 if cover is closed. Made of robust, high-temperature-resistant thermoplastic.
- Easy fastening using 4 fastening screws in standard 19″ frames.
- The power supply connection is made using tube cable lugs at the rear of the box via the integrated M12 threaded post contacts.
- Available in variants with or without a safety cover. Safety cover provides additional protection against environmental influences when not plugged in.
Applications
- Can be used for mobile and stationary power supply or emergency power supply via generators or battery storage systems.
- Suitable for electric motors and cooling units.
- Suitable for three-phase current and direct current applications up to 400 A.
- For connecting single-pole EPIC® POWERLOCK circular connectors.
- For use with unscreened single cores.
- Withstands moderate mechanical stress.
- Suitable for outdoor use.
Product notes
- Trade product, not a LAPP product.
Technical specifications
General information
| Brand | EPIC® |
|---|---|
| Product type | Panel-mount base |
| Scope of delivery | including contacts |
| Contacts included | Yes |
| Weight | 4.3 kg |
| Delivery Unit | 1 |
| customs code | 85366990 |
Electrical parameters
| Rated voltage | 1000 V AC rms / DC according to IEC |
|---|---|
| Rated current | 400 A according to IEC |
| Overvoltage category | III |
| Max. contact resistance | 2 mΩ |
Product design
| Locking type | Turning Lock |
|---|---|
| Connector housing design | Straight |
| With hinged lid | Yes |
| With protective earth | Yes |
| Premature PE contact | Yes |
| Connector type | Source |
| Contact connection type | Thread for cable lug |
| Min. connectable conductor cross-section (mm2) | 50 mm² |
| Max. connectable conductor cross-section (mm2) | 120 mm² |
| Housing colour | black |
Product features
| Min. number of insertion cycles | 500 |
|---|---|
| Protection class (IP), mounted | IP 65 |
| IP protection class plugged in | IP 67 |
| Operating temperature min. | -30 °C |
| Operating temperature max. | 85 °C |
| Halogen-free | No |
| Min. power contact tightening torque | 27.5 Nm |
| Max power contact tightening torque | 27.5 Nm |
| Maximum tightening torque main contact | 31.4 Nm |
| Maximum tightening torque for PE connection | 31.4 Nm |
| Impact-resistant | Yes |
Certifications and standards
| CE marking | Yes |
|---|---|
| EAC-certified | Not required |
| EAC certification number | Отказное письмо № 39 |
| UR recognised | No |
| cUR recognised | No |
| VDE certified | No |
| Product standard according to IEC | IEC 61984 |
Datasheets and certificates
Manufacturer notes
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- * Trade product, not a LAPP product.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.