Insert with screw connection Pin; Number of contacts: 5; Design size: 6B; 1000 V AC rms / DC according to IEC; 40 A according to IEC; For cross-section (min./max.): 2.5mm² – 10mm²; Contacts included; Polycarbonate
Benefits
- Fast and easy assembly
- Very high current transfer
- Lower space requirement
- Axial screw termination for assembly without special tool
Applications
- Mechanical engineering
- Plant engineering
- Renewable energy
Product notes
- Trade product, not a LAPP product.
Technical specifications
General information
| Brand | EPIC® |
|---|---|
| Product type | Insert with screw connection |
| Design size | 6B |
| Contacts included | Yes |
| Weight | 0.079 kg |
| Delivery Unit | 1 |
| customs code | 85366990 |
Electrical parameters
| Rated impulse voltage | 8 kV AC rms / DC according to IEC 61984 |
|---|---|
| Rated voltage | 1000 V AC rms / DC according to IEC; 600 V AC rms / DC according to UL; 600 V AC rms / DC according to CSA |
| Rated current | 40 A according to IEC; 40 A according to UL; 40 A according to CSA |
| Overvoltage category | III |
| Max. contact resistance | 1 mΩ |
| Protective earth integrated into insert | Yes |
Product design
| Number of contacts | 5 |
|---|---|
| Number of power contacts | 4 |
| Number of PE contacts | 1 |
| Contact variant | Pin |
| Contact manufacturing method | Machined |
| Contact insert type | Plug |
| With wire protection | Yes |
| With protective earth | Yes |
| Connector type | Plug |
| Contact insert without contacts | No |
| EMC shielding | No |
| Conductor connection type | Axial screw connection |
| PE connection type | Screw connection |
| Min. connectable conductor cross-section AWG | 14 AWG |
| Max. connectable conductor cross-section AWG | 8 AWG |
| Min. connectable conductor cross-section (mm2) | 2.5 mm² |
| Max. connectable conductor cross-section (mm2) | 10 mm² |
| Contact material | Brass |
| Contact material, short form | CuZn |
| Contact coating material | Silver-plated |
| Contact coating material, short form | Ag |
| Material contact insert | Polycarbonate |
| Contact insert material, short form | PC |
| Colour | grey |
Product features
| Min. number of insertion cycles | 500 |
|---|---|
| Pollution degree | 3 |
| For use in hazardous areas | No |
| Operating temperature min. | -40 °C |
| Operating temperature max. | 125 °C |
| Flame-retardant | Yes |
| Flame retardance according to | UL 94 V-0 |
| UV-resistant | No |
| Chemical resistant | No |
| Acid-resistant | No |
| Halogen-free | No |
| Minimum tightening torque for PE connection | 1.2 Nm |
| Maximum tightening torque for PE connection | 1.2 Nm |
| Impact-resistant | Yes |
| Vibration protection | No |
Certifications and standards
| CE marking | No |
|---|---|
| UR recognised | No |
| cUR recognised | No |
| CSA certified | No |
| VDE certified | No |
| Product standard according to IEC | IEC 61984 |
| TÜV certified | No |
| Fire protection tested for railway vehicles | No |
Datasheets and certificates
Manufacturer notes
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- * Trade product, not a LAPP product.
LAPP product information and documents
Manufacturer nominal values; images are representative. The confirmed configuration, quantity and displayed total apply to the order.
Reviews
There are no reviews yet.