Teltonika RUTC41 – router
- Mobile module: 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/ 5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps
- Wireless mode: 802.11b/g/n/ac/ax (Wi-Fi 6) with data transmission rates up to 2402Mbps on 5GHz, 576Mbps on 2.4GHz (Dual Band, MU-MIMO)
- Input voltage range: 9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
- Dimensions (W x H x D): 130.4 x 42.6 x 104 mm
- Operating temperature: -40 °C to 75 °C
Technical specifications
Mobile
| Mobile module | 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/ 5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps |
|---|---|
| eSIM | Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans |
| 3GPP Release | Release 9 |
| SIM switch | 2 SIM cards and 1 eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, SIM provider, operator, network type, cell ID, LAC, TAC, ARFCN, UARFCN, EARFCN |
| SMS | SMS status/configuration; email, HTTP and SMS forwarding; scheduling, automatic replies and SMPP. |
| USSD | Send and read USSD messages. |
| Block/Allow list | Operator or country based block/allow lists. |
| Band management | Band locking and active-band display. |
| SIM idle protection service | Periodically connect through the unused SIM to reduce inactivity-related SIM blocking. |
| SIM PIN code management | Set, change or disable the SIM PIN. |
| APN | Auto APN |
| Bridge | Bridge the cellular provider connection to a LAN device. |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
| Framed routing | Framed routing: support an IP network behind 5G UE |
Wireless
| Wireless mode | 802.11b/g/n/ac/ax (Wi-Fi 6) with data transmission rates up to 2402Mbps on 5GHz, 576Mbps on 2.4GHz (Dual Band, MU-MIMO) |
|---|---|
| Wi-Fi security | WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF) |
| SSID/ESSID | SSID stealth mode and access control based on MAC address |
| WiFi users | Up to 500 simultaneous connections |
| Wireless Connectivity Features | Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k) |
| Wireless MAC filter | Allowlist, blocklist |
| Wireless QR code generator | Join Wi-Fi by scanning a QR code. |
| TravelMate | Forward Wi-Fi hotspot landing page to a subsequent connected device |
Ethernet
| WAN | 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
|---|---|
| LAN | 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
System Characteristics
| CPU | Mediatek, Dual-core, 1.3 GHz, ARM Cortex A53 |
|---|---|
| RAM | 1 GB, DDR4 |
| FLASH storage | 16 MB serial NOR flash, 8 GB eMMC Flash |
Input/Output
| Input | 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 50 V detected as logic high |
|---|---|
| Output | 1 x Digital Output, Open collector output, max output 50 V, 300 mA |
| Events | Email, RMS, SMS |
| I/O juggler | Trigger events from configurable I/O conditions. |
Power
| Connector | 4-pin industrial DC power socket |
|---|---|
| Input voltage range | 9 - 50 VDC, reverse polarity protection, voltage surge/transient protection |
| PoE (passive) | Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC |
| Power consumption | Idle: < 5.5 W, Max: < 13.5 W |
Physical Interfaces
| Ethernet | 5 x RJ45 ports, 10/100/1000 Mbps |
|---|---|
| I/O’s | 1 x Digital Input, 1 x Digital Output on 4-pin power connector |
| Status LEDs | 4 x WAN type, 3 x Mobile connection type, 3 x Mobile connection strength, 10 x LAN status, 1 x Power, 2 x 2.4G and 5G Wi-Fi |
| SIM | 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders |
| Power | 1 x 4-pin power connector |
| Antennas | 2 x SMA for Mobile, 3 x RP-SMA for Wi-Fi |
| USB | 1 x USB A port for external devices |
| Reset | Reboot/User default reset/Factory reset button |
| Other | 1 x Grounding screw |
Physical Specification
| Casing material | Anodised aluminium housing and panels |
|---|---|
| Dimensions (W x H x D) | 130.4 x 42.6 x 104 mm |
| Weight | 480 g |
| Mounting options | DIN rail, wall mount, flat surface (all require additional kit) |
Operating Environment
| Operating temperature | -40 °C to 75 °C |
|---|---|
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
Network
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing |
|---|---|
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN |
| VoIP passthrough support | NAT helpers for H.323 and SIP ALG. |
| Connection monitoring | Ping/Wget and periodic reboot; LCP/ICMP link checks. |
| Firewall | Port forwarding, traffic/custom rules and adjustable TTL targets. |
| Firewall status page | Firewall rules, counters and statistics in the status view. |
| Port management | Enable/disable ports; configure speed and auto-negotiation. |
| Network topology | Topology view of connected network devices. |
| DHCP | Static/dynamic allocation, DHCP relay/server, status and static MAC leases with wildcards. |
| QoS / Smart Queue Management (SQM) | Priority queues by source/destination, service, protocol or port; WMM and 802.11e. |
| DDNS | More than 77 preconfigured providers; additional providers configurable manually. |
| DNS over HTTPS | DNS proxy using HTTPS for encrypted DNS queries. |
| Network backup | Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
| Load balancing | Balance Internet traffic over multiple WAN connections |
| Hotspot | Captive portal with internal/external RADIUS, RADIUS MAC, SMS and SSO authentication; internal/external landing page, walled garden, scripts, URL parameters, users/groups and limits; 9 editable themes with theme import/export. |
| Hotspot 2.0 | Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks |
| SSHFS | Mount remote file systems through SSH. |
| VRF support | Initial virtual routing and forwarding (VRF) support |
| Traffic Management | Live traffic monitoring, radio-signal charts and usage history. |
| IGMP Proxy | Possibility to relay multicast membership messages between hosts and a router, enabling multicast traffic to flow across different network segments |
| Port Mirroring | Mirroring network traffic on Ethernet ports for monitoring and analysis |
Security
| 802.1x | Port-based network access control client and server support |
|---|---|
| Authentication | PSK, digital/X.509 certificates, TACACS+ and internal/external RADIUS; IP/login blocking, timed lockouts and random password generation. |
| Firewall | WebUI presets and CLI configuration; DMZ, NAT, NAT-T and NAT64. |
| Attack prevention | DoS protections for SYN flood, SSH and HTTP/HTTPS; scan detection for SYN-FIN, SYN-RST, X-mas, NULL and FIN. |
| VLAN | Port based and tagged VLAN separation. |
| Mobile quota control | Cellular data limits with period, start time, warning threshold and notification number. |
| WEB filter | Website blocklists and allowlists. |
| Access control | Access rules for SSH, WebUI, CLI and Telnet. |
| Certificate Manager | Create CA, server/client, Let’s Encrypt and SCEP certificates. |
VPN
| OpenVPN | Simultaneous server and multiple clients; 27 encryption options. |
|---|---|
| OpenVPN Encryption | DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256 |
| IPsec | XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) |
| GRE | GRE and GRE over IPsec tunnels. |
| PPTP, L2TP | Concurrent client/server instances; L2TPv3 and L2TP over IPsec. |
| Stunnel | TLS proxy for existing client/server applications. |
| DMVPN | Scalable IPsec VPN: phase 2, phase 3 and dual-hub operation. |
| SSTP | SSTP client. |
| ZeroTier | ZeroTier client. |
| WireGuard | WireGuard client and server. |
| Tinc | Tinc client/server with encryption, authentication and compression. |
| Tailscale | Tailscale encrypted point-to-point VPN using WireGuard. |
| Netbird | Open-source private-network management based on WireGuard. |
| EoIP | Ethernet over IP (EoIP) tunnelling is a protocol based on GRE RFC 1701 that creates an Ethernet tunnel between two routers on top of an IP connection |
| OpenConnect | Cross-platform multi-protocol SSL VPN client which supports a number of VPN protocols |
BacNET
| Supported modes | Router |
|---|---|
| Supported connection types | IP, RTU (USB) |
| Configuration options | Multiple BACnet/IP interfaces, network-number assignment and preset BDT entries for BBMD. |
OPC UA
| Supported modes | Client, Server |
|---|---|
| Supported connection types | TCP |
MODBUS
| Supported modes | Server, Client |
|---|---|
| Supported connection types | TCP, USB |
| Custom registers | File backed custom Modbus TCP register blocks for read/write requests. |
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
Data to Server
| Protocol | HTTP(S), MQTT, Azure MQTT |
|---|---|
| Data to server | Collect parameters across sources/protocols and transmit to one server; custom Lua scripts supported. |
MQTT Gateway
| Modbus MQTT Gateway | Read Modbus-server data and send commands through an MQTT broker. |
|---|
DNP3
| Supported modes | Station, Outstation |
|---|---|
| Supported connection | TCP |
DLMS/COSEM
| DLMS Support | Utility-meter data exchange using DLMS. |
|---|---|
| Supported modes | Client |
| Supported connection types | TCP, USB |
API
| Teltonika Networks Web API (beta) support | Configurable API endpoints to read/change device data; developer documentation available. |
|---|
Site Manager
| Supported modes | Manager |
|---|---|
| Functionalities | Manage TAP access points and Teltonika managed switches: pairing/grouping, FOTA, status, scheduled reboot with ping/Wget checks, SSIDs and VLANs. |
Monitoring & Management
| WEB UI | HTTP/HTTPS administration: status, settings, firmware, CLI, diagnostics, remote/event/system/kernel logs and update notifications. |
|---|---|
| FOTA | Server based firmware updates with notifications. |
| SSH | SSH (v1, v2) |
| SMS | Status and configuration by SMS. |
| Call | Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off |
| Receive email message status alerts of various services | |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
| MQTT | MQTT Broker, MQTT publisher |
| SNMP | SNMP (v1, v2, v3), SNMP Trap, Brute force protection |
| JSON-RPC | Management API through HTTP/HTTPS. |
| RMS | Teltonika Remote Management System (RMS) |
IoT Platforms
| ThingWorx | Monitor WAN type/IP, operator, cellular signal and network type. |
|---|---|
| Cumulocity - Cloud of Things | Monitor device/revision/serial, WAN, cell ID, ICCID/IMEI, connection, operator and signal; remote reboot and firmware updates. |
| Azure IoT Hub | Cloud telemetry through Data to Server; RutOS API direct methods; Plug and Play with Device Provisioning Service. |
| AWS IoT Core | AWS IoT integration with device API calls through AWS Jobs. |
DOCKER
| Docker Support | Supports running isolated applications and services using Docker containers, enabling custom software environments and microservices deployment directly on the device |
|---|
Firmware/Configuration
| WEB UI | Local/server firmware update, configuration profiles and backups. |
|---|---|
| FOTA | Firmware update. |
| RMS | Batch firmware/configuration updates for multiple devices. |
| Keep settings | Retain configuration during firmware updates. |
| Factory settings reset | Restore manufacturer defaults, including IP, PIN and user data settings. |
FIRMWARE CUSTOMISATION
| Operating system | RutOS (OpenWrt based Linux OS) |
|---|---|
| Supported languages | Busybox shell, Lua, C, C++ |
| Development tools | SDK with build environment. |
| GPL customization | Customize firmware branding, colours, logos and web applications. |
| Package Manager | Install additional software packages on the device. |
USB
| Data rate | USB 2.0 |
|---|---|
| Applications | Samba share, USB-to-serial |
| External devices | Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter |
| Storage formats | FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 |
Accessories with manufacturer-listed compatibility
Check connector, regional version and any limitations on the accessory page.
- Teltonika PR324EUB – EU Single Port Gigabit Passive PoE Injector, 24 W
- Teltonika PR3PDNP0 – DIN Rail Power Supply, 20 W, 12 V
- Teltonika PR2PP10B – 4-Pin To 4-Pin Power Cable
- Teltonika PR4MK04K – 4-Pin Plug With Contact Terminals
- Teltonika PR5MEC21 – 4-Pin Power Adapter With I/O Access
- Teltonika PR2PD01B – 4-Pin To Barrel Socket Adapter
- Teltonika PR2PL15B – Power Cable With 4-Way Open Wire
- Teltonika PR2FK20M – Power Cable With 4-Way Screw Terminal
- Teltonika PR2AM20M – Automotive Power Supply
- Teltonika PR3PXAU3 – AU Power Supply, 18 W
- Teltonika PR3PXUS3 – US Power Supply, 18 W
- Teltonika PR3PXUK3 – UK Power Supply, 18 W
- Teltonika PR3PXEU3 – EU Power Supply, 18 W
- Teltonika PR3P2AU3 – AU Power Supply, 24 W
- Teltonika PR3P2US3 – US Power Supply, 24 W
- Teltonika PR3P2UK3 – UK Power Supply, 24 W
- Teltonika PR3P2EU3 – EU Power Supply, 24 W
- Teltonika PR315PS3 – Universal Power Supply, 24 W
- Teltonika BAT120000000 – Bat120 – Uninterruptible Power Supply
- Teltonika PR2VM20M – SMA Cable Extension
- Teltonika PR1KCL25 – Combo MIMO Mobile Roof SMA Antenna
- Teltonika PR14RD35 – Wi-Fi Dual-Band SMA Antenna
- Teltonika PR1KRD30 – Wi-Fi Dual-Band Magnetic SMA Antenna
- Teltonika PR1AS420 – Mobile Adhesive SMA Antenna
- Teltonika PR1US450 – Angled Compact Mobile SMA Antenna
- Teltonika PR1CS450 – Straight Compact Mobile SMA Antenna
- Teltonika PR1US440 – Mobile SMA Antenna
- Teltonika PR1KS210 – Mobile Magnetic SMA Antenna
- Teltonika PR5MEC23 – DIN Rail Kit Adapter
- Teltonika PR5MEC12 – Surface Mounting Kit
- Teltonika PR5MEC00 – DIN Rail Kit
- Teltonika PR5MEC11 – Compact DIN Rail Kit
- Teltonika PR5MEC32 – RJ45 Dust Covers
- Teltonika PR5MEC19 – Sim Adapter Kit
- Teltonika PR2LA15B – Ethernet Cable 1.5M
Documentation and downloads
Technical information checked against the linked manufacturer page on 17 October 2026. Radio bands, approvals and package contents can depend on the full order code and region. Software features depend on firmware, configuration and any additional packages or licences. Price and availability are confirmed on enquiry.
Reviews
There are no reviews yet.